- First End Style
- Chamfered
- Head Style
- Knurled no. 1
- Diameter
- 0.2490 inches minimum and 0.2498 inches maximum
- Undercut Diameter
- 0.200 inches minimum and 0.220 inches maximum
- Under Head Length
- 0.760 inches minimum and 0.820 inches maximum
- Undercut Width
- 0.040 inches minimum and 0.080 inches maximum
- Hole Arrangement Style
- One end drilled
- First Hole Diameter
- 0.078 inches minimum and 0.083 inches maximum
- Distance from Centerline of Hole to End of PIN
- 0.080 inches minimum and 0.100 inches maximum
- First End Taper Length
- 0.020 inches minimum and 0.040 inches maximum
- Features Provided
- Casehardened
- Hardness Rating
- 42.0 rockwell C minimum overall and 46.0 rockwell C maximum overall
- First End Taper Angle
- 45.0 degrees nominal
- PIN Head Diameter
- 0.300 inches minimum and 0.340 inches maximum
- Surface Finish
- 16.0 microinches long shank
- Special Features
- Head, pointed, .010 in. porm .030 in. spher r; head angle, .88 deg porm .92 deg
- Height
- 0.160 inches minimum and 0.200 inches maximum
- Material
- Steel comp O2 overall
- Material Document and Classification
- Sae assn std single material response overall
- Style Designator
- Groove
Catalogue data is compiled from public DLA/FLIS sources and is provided for
identification. Availability, condition and certification are confirmed on
quotation. OmniSynk Distribution Services is a stocking distributor.