- Thread Class
- 2A
- Thread Direction
- Right-hand
- Body Style
- Straight shape, flange mount, external coupling
- Overall Length
- 2.060 inches maximum
- Overall Height
- 1.969 inches minimum and 2.031 inches maximum
- Overall Width
- 1.969 inches minimum and 2.031 inches maximum
- Environmental Protection
- Moisture resistant and salt water resistant and vibration resistant
- Unthreaded Mounting Hole Diameter
- 0.142 inches minimum and 0.152 inches maximum
- Center to Center Distance Between Mounting Facilities Parallel to Height
- 1.557 inches minimum and 1.567 inches maximum
- Distance Between Centerlines of Mounting Facilities Parallel to Body Width
- 1.557 inches minimum and 1.567 inches maximum
- Distance from Mounting Shoulder to Front Face
- 0.812 inches minimum and 0.843 inches maximum
- Threaded Device Type
- Coupling facility
- Mating End Quantity
- 1
- Contact Position Arrangement Style
- 28-21 single mating end
- Contact Removability
- Nonremovable single mating end single contact grouping
- Contact Maximum Current Rating in Amps
- 22.0 single mating end single contact grouping
- Contact Maximum AC Voltage Rating in Volts
- 500.0 single mating end single contact grouping
- Contact Maximum DC Voltage Rating in Volts
- 700.0 single mating end single contact grouping
- Polarization Method
- Keyway or multiple keyway
- Insert Position in DEG
- 0.0
- Shell Type
- Potting
- Connector Locking Method
- Externally threaded shell
- Connector Cable Strain Relief Method
- Potting type
- Nominal Thread Length
- 0.625 inches
- Thread Quantity per Inch
- 18
- Nominal Thread Size
- 1.750 inches
- Terminal Location
- Back single mating end single contact grouping
- Contact Surface Treatment
- Gold single mating end single contact grouping and silver single mating end single contact grouping
- Terminal Type
- Solder well single mating end single contact grouping
- Shell Material
- Aluminum alloy
- Shell Surface Treatment
- Cadmium
- Shell Surface Treatment Document and Classification
- QQ-P-416, ty 2, cl 3 fed spec single treatment response
- Included Contact Quantity
- 37 single mating end single contact grouping
- Included Contact Type
- Round pin single mating end single contact grouping
- Precious Material and Location
- Contact surfaces gold and contact surfaces silver
- Precious Material and Weight
- 0.037 gold grains, troy and 0.037 silver grains, troy
- Precious Material
- Gold and silver
- Test Data Document
- 81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
- Thread Series Designator
- UNS
- Specification/Standard Data
- 81349-MIL-C-5015 government specification
Catalogue data is compiled from public DLA/FLIS sources and is provided for
identification. Availability, condition and certification are confirmed on
quotation. OmniSynk Distribution Services is a stocking distributor.