- Thread Class
- 2A
- Thread Direction
- Right-hand
- Body Style
- Straight shape W/cable clamp
- Overall Length
- 1.672 inches maximum
- Overall Height
- 0.985 inches minimum and 1.000 inches maximum
- Overall Width
- 0.985 inches minimum and 1.000 inches maximum
- Environmental Protection
- Moisture proof and salt water resistant and vibration resistant
- Unthreaded Mounting Hole Diameter
- 0.120 inches minimum and 0.130 inches maximum
- Center to Center Distance Between Mounting Facilities Parallel to Height
- 0.713 inches minimum and 0.723 inches maximum
- Distance Between Centerlines of Mounting Facilities Parallel to Body Width
- 0.713 inches minimum and 0.723 inches maximum
- Distance from Mounting Shoulder to Front Face
- 0.641 inches minimum and 0.671 inches maximum
- Threaded Device Type
- Coupling facility
- Mating End Quantity
- 1
- Contact Position Arrangement Style
- N single mating end
- Contact Removability
- Nonremovable single mating end single contact grouping
- Contact Maximum AC Voltage Rating in Volts
- 1000.0 single mating end single contact grouping
- Contact Maximum Frequency Rating
- 1000.0 megahertz single mating end single contact grouping
- Shell Type
- Solid
- Connector Locking Method
- Externally threaded shell
- Connector Cable Strain Relief Method
- Compression nut
- Radio Frequency Type Contact Characteristic Impedance in Ohms
- 50.0 single mating end single contact grouping
- Thread Quantity per Inch
- 24
- Nominal Thread Size
- 0.625 inches
- Terminal Location
- Back single mating end single contact grouping
- Contact Surface Treatment
- Gold single mating end single contact grouping
- Contact Surface Treatment Document and Classification
- MIL-G-45204, type 2, class 2 mil spec single treatment response single mating end single contact grouping
- Terminal Type
- Solder well single mating end single contact grouping
- Shell Material
- Copper alloy
- Included Contact Quantity
- 1 single mating end single contact grouping
- Included Contact Type
- Coaxial socket single mating end single contact grouping
- Precious Material and Location
- Contact surface gold
- Precious Material and Weight
- 0.005 gold grains, troy
- Precious Material
- GOLD
- Test Data Document
- 81349-MIL-C-39012 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
- Thread Series Designator
- UNEF
- Specification/Standard Data
- 81349-MIL-C-39012/2 government specification
Catalogue data is compiled from public DLA/FLIS sources and is provided for
identification. Availability, condition and certification are confirmed on
quotation. OmniSynk Distribution Services is a stocking distributor.